2.4Ghz 802.11g AGC Outdoor rated 1.0watt Amplifier
Product Description
2.4GHZ AMPLIFIER, BI-DIRECTIONAL 802.11g & 802.11b COMPATIBLE, AUTOMATIC GAIN CONTROL, OUTDOOR 1000MW
Frequency: 2.4-2.5GHz Operating Mode: Bi-directional TDD (Time Division Duplex) Transmitter Output Power: 1000mW (30dBm) Transmitter Input Power (min): 1.6mW (2dBm) Transmitter Input Power (max): 31.6mW (15dBm) Receiver Input Power: -39.8mW (-16dBm) max. Receiver Gain: 20dB Frequency Response Flatness: ±1dB over operating range Noise Figure: < 4dB Switch Time: < 1µs Connectors: N-type female (50 ohm) Operating Temperature: -30°C to +70°C Dimensions (L x W x H): 4.7 x 2.8 x 0.7in (120 x 72 x 18mm) Weight: 0.84lb (380g)
DC INJECTOR Input Power: 12V, 2.0A Connectors: N-type female (50 ohm) Dimensions (L x W x H): 3.9 x 2.1 x 0.8in (99 x 54 x 21mm) Weight: 0.36lb (165g)
FCC NOTICE: To comply with FCC part 15 rules in the United States, this amplifier must only be used in systems that have been FCC certified. The system must also be professionally installed to ensure compliance with the Part 15 certification. It is the responsibility of the operator and professional installer to ensure that only certified systems are deployed in the United States.
Frequency: 2.4-2.5GHz Operating Mode: Bi-directional TDD (Time Division Duplex) Transmitter Output Power: 1000mW (30dBm) Transmitter Input Power (min): 1.6mW (2dBm) Transmitter Input Power (max): 31.6mW (15dBm) Receiver Input Power: -39.8mW (-16dBm) max. Receiver Gain: 20dB Frequency Response Flatness: ±1dB over operating range Noise Figure: < 4dB Switch Time: < 1µs Connectors: N-type female (50 ohm) Operating Temperature: -30°C to +70°C Dimensions (L x W x H): 4.7 x 2.8 x 0.7in (120 x 72 x 18mm) Weight: 0.84lb (380g)
DC INJECTOR Input Power: 12V, 2.0A Connectors: N-type female (50 ohm) Dimensions (L x W x H): 3.9 x 2.1 x 0.8in (99 x 54 x 21mm) Weight: 0.36lb (165g)
FCC NOTICE: To comply with FCC part 15 rules in the United States, this amplifier must only be used in systems that have been FCC certified. The system must also be professionally installed to ensure compliance with the Part 15 certification. It is the responsibility of the operator and professional installer to ensure that only certified systems are deployed in the United States.
