2.4Ghz 802.11G AGC, Antenna Style 500MW, RP-SMA

The 24A500A Antenna Amp is a highly efficient and compact unit designed to increase the performance and range of any wireless device in the 2.4 GHz ISM band. Such devices include all Bluetooth, P2P, P2MP, 802.11b, 802.11b+, 802.11g, and 802.11b+g access points and wireless routers. In certain conditions the Antenna Amp is able to double the range of the wireless device. The Antenna Amp can extend the signal range and eliminate the use of an additional radio with its associated data line, power outlet, signal interference, and setup headaches. The Antenna Amp is the fast and easy way to extend your signal range in any environment.

The 24A500A Antenna Amp uses Time Division Duplex (TDD) technology. For Tx, we use a high-power, high-efficiency, linear amplifier MMIC manufactured on an advanced Gallium Arsenide Heterojunction Bipolar Transistor (HBT). Also, a power limit function regulates the output power level to an acceptable range. In WLAN applications, it produces a continuous output power of 500mW under the 802.11b spectral mask. For Rx, a low noise LNA provides greater receiving dynamic range and improves the overall quality of the incoming signal.

Frequency: 2.4-2.5GHz

Operating Mode: Bi-directional TDD (Time Division Duplex)

Transmitter Output Power: 500mW (27dBm)

Transmitter Input Power: 100mW (20dBm) max.

Receiver Input Power: -0.1mW (-10dBm) max.

Receiver Gain: 20dB

Switch Time: < 1µs

Power Consumption: 6.5V @ 650mA

Connector: Right-Angle Reverse Polarity SMA Male

Diagnosis LED: PWR @ Green || TX @ Red || RX @ Yellow

Operating Temperature: -0°C to +40°C

Dimensions (L x W x H): 6.1 x 0.9 x 0.7in (155 x 22 x 19mm)

POWER SUPPLY

Input: 100-240VAC 50/60Hz 0.45A max.

Output: 6.5VDC 1A